Công tắc DIP2 (4 chân)
- Operation Force: 800g Max
- Stroke: 2.00mm
- Operation temp: -20degree ~ 70degree
- Storage Temp: -40degree to 85degree
BASE: Engineering plastics,Black.
COVER: Engineering plastics,Red.
BUTTON: Engineering plastics,White.
TERMINAL: Alloy copper,Gold plating.
- Electrical Life: 2000 operations cycles per switch.
- Non-Switching Rating: 100mA,50VDC
- Switching Rating: 25mA,24VDC
- Contact Resistance: 50m Max,at initial;100m Max,after life test.
- Insulation Resistance: 100m,500VDC
- Dielectric Serength: 500VCD/1 minute
- Capacitance: 5pF Max.
- Circuit:Single pole single throw.
SOLDERING AND CLEANING PROCESSES
- Keep all switch contacts in their "OFF" position for all operation .
- Wave Soldering: Recommended Solder Temperature at 260degree Max.5 seconds for IC type.
- Hand Soldering: Use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds,while applying solder.
- Cleaning Process: Flux clean using force rinse,high agitation or triple bath cleaning mathod.
- Freon TF or TE give excellent results.When vapor methods are used do not subject the switch to solvents at temperature above 51degree.
- All DIP switches are packed in standard IC tube.
- 70pcs / Tube, 4200 pcs/ Box